Custom Design 3D MicroCrystalline Resin (MCR)
MCR 3D Floors
A 3D floor is quite a bold decision for your interior. Instead of being background the floor becomes the main detail. Automatically, all furnishing, the lightning becomes a background for the 3D image. The wide range of colors and modern technology allow the creation of unique self-levelling floors with panorama or 3D pictures, created by designers according to your wishes and suitable for your interior.
With 3D flooring, you can use your imagination.
You can have the sofa in the living room standing on a seaside, dolphins dwelling in your bathroom, a large hemisphere map laid on your company's office floor comical pictures on your nursery floor.
Now you have the ability to customize and to personalize your house by choosing one of our 3D pictures or our designers can create an image you want.
The 3D Microcrystalline resin floors are robust, slip resistant and durable.
Residential resin floors thickness is approximately 3-5mm.
Seamless impervious finish.
High mechanical strength, impact and scratch resistant.
The 3D design looks aesthetically pleasing.
It offers the possibility of transforming a room into an environment or a place you dream of, a beach, forest, waterfall.
Low dirt retention, easy to clean a look after.
The floors do not have any gaps where dirt and dust can be accumulated, therefore they are applied in accordance with all ecological and hygienic regulations.
The 3D floors can have an anti-sleep layer.
Hi, UV stability on the normal daylight conditions.
3D designs are widely applied in private houses, bathroom, living room, guest room, entertainment centers.
They are also perfect for children's rooms or child care centers.
A 3D floor can completely change the interior of any house.
A high-quality properly installed floor will delight you with its beautiful appearance, practicality, originality and uniqueness for many years to come.
1.MCR- Primer---Two Components Floor Coating System 2:1 Mix Ratio.A+B
Waterproof Barrier, Against Moisture, Corrosion Inhibiting, Excellent Adhesion Designed for commercial, industrial, and residential concrete, cement, wood and tile floor coating, to penetrate deeper into the pores in order to achieve a better mechanical bond and produce a thinner film or tie coat that the much thicker base coat can chemically fuse with.
In the middle, install the 3D Effect Stickers.
2.MCR Middle Coat---Two Components Floor Coating System 2:1 Mix Ratio A+B
Waterproof Barrier, Against Moisture, Impact Resistance, Scratch Resistance Designed for commercial, industrial, and residential buildings. Concrete, cement, wood and tile floor coating, can be used with metallic Color Pigments, Solid Color Pigments, Color Flakes, Quartz, Color Granules, Mica Flakes, Polymer Color Flakes, Paint Chips, Color Glitters.
3.MCR- Top Coat / High Gloss Top Coat---Two Components Floor Coating System 2:1 Mix Ratio A+B
Waterproof Barrier, Against Moisture, Impact Resistance, Scratch Resistance, Anti-slip and UV Stable
Designed for commercial, industrial, and residential buildings. Concrete, cement, wood and tile floor coating, can be applied directly over Epoxy Middle Coating for a high gloss protective finish.
MCR Primer - Thickness 1mm- Quantity/sqm 150grams
MCR Middle Coat - Thickness 2mm- Quantity/sqm 300grams
MCR Top Coat - Thickness 1mm- Quantity/sqm 150grams
Above coverage is approximate as much depends on the preparation of the floor
How to apply MCR on your floor?
Step by Step Guide to installing your bespoke MCR floor
Step 1. Prepare the surface.
Preparation of the substrate is necessary in order to ensure adhesion between the MCR product and the substrate. Suitable methods are sanding or diamond-grinding. Any surfaces that have been contaminated with oils may also require chemical cleaning.
Step 2. Cleaning of the floor.
Use an industrial vacuum that picks up even the smallest dust particles. The floor must be cleaned of all specks of dust and residues before starting to prime. Otherwise, you will have various particles trapped within the coat and adhesion will be significantly weakened. The less micro-dust on the surface the less primer you will need.
Step 3. Prime the floor with a suitable primer of MCR
Always prime the floor, don't believe claims that priming is not necessary. Priming will give your floor a longer life and better adhesion to the substrate. Priming will seal the substrate thus eliminating the risks of bubbles and gasses. Priming helps reduce the amount of product that will be required in the later stages. Ensure that the areas are ventilated properly. It is common to coat two layers of primer in order to properly seal the floor. Use a proper electrical mixer to mix the A and B component.
Step 4. Fill all cracks, holes etc.
This step can also take place before priming. For thin cracks, it may be necessary to slice them with a diamond cutter before filling in order to improve anchoring. There are different types of fast curing fillers and self-levelling materials on the market check with your local supply store, get in touch with us if more advice is required, we will be happy to help.
Step 5. Install the 3D Effect self-adhesive sticker
We can custom make HD 3D printed self-adhesive stickers that are suitable for 3D MCR floors.
Choose a design from our online database or our catalogue we have hundreds of 3D designs that are made especially for 3D MCR Floors.
Put the 3D Effect Stickers on the surface of MCR- primer, making sure that the design is aligning perfectly. Brush on some MCR middle-coat A+B mixed and apply on the 3D effect stickers to make sure the 3D stickers bonds tightly to the primed floor. Clear the surface area thoroughly and make sure that nothing is left on top of the 3D Design before applying the top coat.
Step 6. Mixing of MCR
First Mix the hardener (part B) for 2 minutes after that pour component (part A) and mix for another 3min use an electric mixer for continuous movement -This step is very important-
Adjust the speed of the power tool accordingly start at lower speed first.
Poor mixing will lead to a tacky floor!
Leave to settle for a few minutes allow bubbles to disperse.
Step 7. Apply the mixed product.
Once mixed pour the product in a random pattern across the area you applied the 3D floor. Using a notched squeegee spread the product gently around until you have an even coat on the surface of the floor. Then use a good quality roller, as poor quality rollers may start to shed or spiked ones will back roll the product be careful not to overdo this process.
- Shopping Malls
- Hotel & Casino-
- Animal Hospitals
- Banquet Halls
- Bars, Clubs & Pubs- Bathroom
- Hallways/ Corridors Cafeterias
- Clean Room
- Commercial Kitchens
- Grocery Stores
- Hallways/ Corridors
- Kennels- Pet Stores
- Locker Rooms
- Art Galleries & Museums
- Retirements Homes
- Salons/Spas Tools not included in the kit
- Veterinary Clinics
- Sport Centres
- Easy Maintenance
- Aesthetic Improvements
- Rock Hard and Abrasion Resistant
- VOC Free, 100% Solid, No Odor
- Stain and Chemical resistant
- Anti-microbial & Anti-slip- High Gloss Finish Like Crystal
- Special Colors can match your preferred design
- Overall our MCR products are versatile easy to use simply to work with and a fabulous replacement for dull tile designs.
Packing & Delivery
MCR Floor -Primer 15 Kgs A+B MCR Floor-Middle Coat, 15kgs A+B MCR Floor- Top Coat, 15kgs A+B