Custom Design 3D MicroCrystalline Counter Tops

Metallic Color Pigments are special effect pigments composed of mica nano-particles coated with various organic and inorganic pigments to create pearlescent and iridescent effects that mimic the natural look of stone and rock formations. These unique pigments are designed to be blended with our 100% solids clear MCR Epoxy Middle Coat. When the metallic particles are mixed with epoxy, they give the coating a shine that reflects light and creates eye-catching dramatic effects.

MCR Microcrystalline Resin countertops coating offers a simple step-by-step system for countertops.

Is useful for creating a beautiful elegant countertop, bar top or table top with epoxy resin for a smooth surface that is scratch-resistant, heat resistant, UV resistant, impact resistant, food safe and will last a lifetime.

Choose from our countertop Kits to make a one-of-a-kind countertop that you can show off to friends and family and create the “WOW” effect. Our epoxy countertop coating makes it easy for everyone to create or renew an existing countertop such as laminate, tile, granite, wood, concrete and much more.

The application is completely odourless so there is no need to wear a respirator.

For natural stone patterns choose from our prime coat base colours metallic mica powders, glitters to create veins marbling and other natural stone designs.

These application instructions are intended to provide guidelines for installation of the three-step countertop metallic epoxy Kit.

There are no set rules for applying these pigments as they are merely a creative component to the overall system.



100% solid epoxy and zero VOC Volatile Organic Content which means no solvent or harmful odours to breathe.

There is No need to wear a respirator and worry about ventilation before during or after application.

Seamless, rock hard and non-porous surface which eliminates staining.

No joints or grout lines that attract bacteria yeast fungi or other microorganisms.

High UV resistance and safe for indoor.

No yellowing a non-fading when applied according to instructions, creating a fabulous finish.

Heat resistant rock hard when cured durable, scratch and impact-resistant is 5 times stronger than concrete.

Thickness is creating a strong 3D effect.

Fast application ready to use in approximately 36 hours.

Custom-made, one of a kind countertops endless designs.

FDA approved


The wide range of colours and modern technology allow the creation of unique self-levelling  3D effect with  a metallic colourful look that can match your interior decoration 


Now you have the ability to customize and to personalize your Interior by choosing from a wide range of colours and pigments to create that "WOW" look that will inspire anyone.


  • The 3D Microcrystalline countertops are robust and durable.

  • Residential resin floors thickness is approximately 3-5mm.

  • Seamless impervious finish.

  • High mechanical strength, impact and scratch resistant.

  • The 3D design looks aesthetically pleasing.

  • It offers the possibility of transforming a room

  • Low dirt retention, easy to clean a look after.

  • The 3D countertop does not have any gaps where dirt and dust can be accumulated, therefore they are applied in accordance with all ecological and hygienic regulations.

  • Hi, UV stability on the normal daylight conditions.

3D metallic or pigments designs for countertops are widely applied and starts to become a trend as the choice of colour combination styles are limitless. All Countertops are one of a kind that makes them original with artistic value.    

A 3D Countertop can completely change the interior of any house.
A high-quality properly installed and designed Countertop will delight you with its beautiful appearance, practicality, originality and uniqueness for many years to come.














1.MCR- Primer---Two Components Coating System 2:1 Mix Ratio.A+B


Waterproof Barrier, Against Moisture, Corrosion Inhibiting, Excellent Adhesion Designed for commercial, industrial, and residential concrete, cement, wood and tile floor coating, to penetrate deeper into the pores in order to achieve a better mechanical bond and produce a thinner film or tie coat that the much thicker base coat can chemically fuse with.


2.MCR Middle Coat---Two Components Coating System 2:1 Mix Ratio A+B (mix the pigments)


Waterproof Barrier, Against Moisture, Impact Resistance, Scratch Resistance, Designed for commercial, industrial, and residential buildings. Concrete, cement, wood and tile floor coating, can be used with metallic Color Pigments, Solid Color Pigments, Color Flakes, Quartz, Color Granules, Mica Flakes, Polymer Color Flakes, Paint Chips, Color Glitters.



3.MCR- Top Coat / High Gloss Top Coat---Two Components Coating System 2:1 Mix Ratio A+B


Waterproof Barrier, Against Moisture, Impact Resistance, Scratch Resistance, Anti-slip and UV Stable
Designed for commercial, industrial, and residential buildings. Concrete, cement, wood and tile floor coating, can be applied directly over Epoxy Middle Coating for a high gloss protective finish.


                                                                                                                                  MIXING TOOLS 



MCR Primer   - Thickness  1mm-  Quantity/sqm 150grams 


MCR Middle Coat -  Thickness  2mm- 5mm  Quantity/sqm 300grams + pigments 100grams -300grams no set rules as desired 


MCR Top Coat - Thickness  1mm-  Quantity/sqm 150grams

Above coverage is approximate as much depends on the preparation of the floor  


How to make MCR metallic countertops?


Step by Step Guide to installing your bespoke MCR countertop 


Step 1. Prepare the surface

Mix your concrete surface as usual make the top as required to your specific design after the concrete top is set and solid.  

Preparation of the substrate is necessary in order to ensure adhesion between the MCR product and the substrate. Suitable methods are sanding or diamond-grinding. Any surfaces that have been contaminated with oils may also require chemical cleaning.


Step 2. Cleaning

Use a good vacuum that picks up even the smallest dust particles. The surface must be cleaned of all specks of dust and residues before starting to prime. Otherwise, you will have various particles trapped within the coat and adhesion will be significantly weakened. The less micro-dust on the surface the less primer you will need.


Step 3. Prime surface with a suitable primer of MCR

Always prime the surface, don't believe claims that priming is not necessary. Priming will give your countertop a longer life and better adhesion to the substrate. Priming will seal the substrate thus eliminating the risks of bubbles and gasses. Priming helps reduce the amount of product that will be required in the later stages. Ensure that the areas are ventilated properly. It is common to coat two layers of primer in order to properly seal the countertop. Use a proper electrical mixer to mix the A and B component.


Step 4. Fill all cracks, holes etc.

This step can also take place before priming. For thin cracks, it may be necessary to slice them with a diamond cutter before filling in order to improve anchoring. There are different types of fast curing fillers and self-levelling materials on the market check with your local supply store, get in touch with us if more advice is required, we will be happy to help.


Step 5. Mix Primer coat A+B 2:1 ratio by weight  

Mix A+B first for 2 min then prime the surface with a roller, only prime if it has been prepared in advance and all cracks filled as this will save you time, money and materials.         


 Step 6. Mixing of MCR A+B 2:1 ratio+pigment

First Mix the hardener (part B) for 2 minutes after that pour component (part A) and mix for another 3min use an electric mixer for continuous movement -This step is very important- then add the pigments gradually as desired  

Adjust the speed of the power tool accordingly start at lower speed first.

Poor mixing will lead to a tacky floor!

Leave to settle for a few minutes allow bubbles to disperse.



Step 7. Apply the mixed product.

Once mixed pour the product in a random pattern across the area you wish to apply your designer countertop. Using a notched squeegee spread the product gently around until you have an even coat on the surface. 


Application Environments

- Shopping Malls

- Restaurants-Showrooms

- Hotel & Casino-

- Animal Hospitals
- Bars, Clubs & Pubs- Bathroom

- Hallways/ Corridors Cafeterias

- Commercial Kitchens                                             Learn more  see what you can achieve 

- Greenhouses

- Grocery Stores

- Hallways/ Corridors

- Laboratories

- Locker Rooms

- Art Galleries & Museums

- Offices

- Restrooms

- Retirements Homes

- Salons/Spas                                                                               

- Stadiums

- Veterinary Clinics

- Sport Centres



- Easy of Maintenance

- Aesthetic Improvements

- Hard and Abrasion Resistant

- VOC Free, 100% Solid, No Odor

- Stain and Chemical resistant

- Anti-microbial- High Gloss Finish Like Crystal

- Special Colors can match your preferred design

- Overall our MCR products are versatile easy to use simply to work with and a fabulous replacement for dull tile designs.


Packing & Delivery


 MCR COUNTERTOP-Primer 15 Kgs A+B           MCR COUNTERTOP-Middle Coat,15kgs A+B         MCR COUNTERTOP-Top Coat,15kgs A+B 

































                                                                                          3D INTERIORS LONDON